Description

Oks 404
High Performance And High Temperature Grease
Oks 404 – Product Information

Fields Of Application:

Lubrication of plain, roller and pivoting bearings, splined shafts, threaded spindles and sliding surfaces of all kinds under high loads and a wide temperature range, as well as all sliding speeds permissible for grease lubrication.

Advantages And Benefits:

Fewer Downtimes And Repairs As A Result Of Considerably Reduced Wearing. Supports Sealing Of Bearings And Corrosion Protection.

Application:

For best results clean the lubricating point carefully, e.g. with oks 2610/oks 2611
Universal cleaner. Remove the corrosion protection ahead of the initial filling. Fill the bearings in a way that all the functional surfaces for sure get the grease. Slow moving bearings(dn-value < 50.000) should be filled completely, normal moving bearings should be filled to 1/3 of the free inner housing space. Observe the instructions of the bearing or machine manufacturer. Relubrication with a grease gun on to the grease nipples or with an automatic lubrication system. Relubrication intervals and amount to be defined acc. To the service conditions. If the removal of The Old Grease Is Not Possible The Amount Of Grease Has To Be Limited To Avoid Excess Lubrication Of The Bearing. At Longer Relubrication Intervals A Complete Exchange Of The Old Grease Is Recommended. Only Mix With Appropriate Lubricants. For Additional Questions Please Contact Our Technical Department.

Additional Information:

Packaging (Article Number):
– 400 G Cartridge (00404019)
– 1 Kg Tin (00404034)
– 5 Kg Hobbock (00404050)
– 25 Kg Hobbock (00404062)
– 180 Kg Drum (00404070)

Version
E-04.1/05

The data in this brochure are the result of extensive testing and experience and meet the latest stage of engineering. Due to the diversity of application possibilities and technical realities they can only be recommendations and are not Arbitrarily transferable; thus no obligations, liability or warranty claims can be derived here from. We accept liability for the Fitness of our products for particular purposes and accept such liability in writing in the individual case. In any event any Justified warranty claims shall be limited to the delivery of replacement goods which are free from defect or, in the event That Such Subsequent Improvement Fails, To Reimbursement Of The Purchase Price. Any And All Further Claims, In Particular But Without Limitation Any Liability For Consequent Damage, Shall Be Excluded. Prior To Use Own Testing Must Be Done To Prove Suitability. The Data Are Subject To Change For The Sake Of Technical Progress. &Reg; = Registered Trademark

Technical Data
Oks 404
High Performance And High Temperature Grease
Norm Conditions Unit Value
Classification Din 51 502 Din 51 825 Kp2P-30
Base Oil Type Mineral Oil, Polyalphaolefin
Viscosity Din 51 562-1 +40&Deg;C Mm&Sup2;/S 100
Flash Point Din Iso 2592 ≫ 79 &Deg;C ≫ 200
Thickener Type Lithium-Complex Soap
Consistency Din 51 818 Din Iso 2137 Nlgi- Class 2
Worked
Penetration Din Iso 2137 60 Dh 0,1 Mm 265 – 295
Flow Pressure Din 51 805 -30&Deg;C Mbar ≪ 1.400
Drop Point Din Iso 2176 &Deg;C ≫ 260
Oxidation
Resistance Din 51 808 100H/100&Deg;C Bar ≪ 0,3
Application Data
Density Din En Iso 3838 +20&Deg;C G/Cm&Sup3; 0,93
Colour Light-Coloured
Service Temperatures
Minimum Service Temperature
Din 51 805 ≪ 1.400 Hpa &Deg;C -30
Upper Service Temperature Din 51 821-2 F
50 (A/1500/600), 100H &Deg;C 150
Maximum Service Temperature
&Deg;C 200
Dn- Value Mm Min 350.000
Water Resistance Din 51 807-1 +90&Deg;C Grade 1-3 1 – 90
Corrosion Protection Tests
Skfemcor
Din 51 802 Corr.-Grad 1-5 0 And 0
Skfemcor,
On
Copper
Din 51 811 24H/100&Deg;C Corr.-Grad 1-5 1 – 150
Mechanical / Dynamic Tests
Fag Fe 9 Din 51 821-1 1500/6000-150 H ≫ 100
Wear Protection Tests
Vbt- Weld
Load (Four Ball Test Rig)
Din 51 350-4 N 2.800
Vbt- Wear Din 51 350-5 1.420 U/Min/1 H/800 N Mm ≪ 0,8

The Data In This Brochure Are The Result Of Extensive Testing And Experience And Meet The Latest Stage Of Engineering.

Due to the diversity of application possibilities and technical realities they can only be recommendations and are not arbitrarily transferable; thus no obligations, liability or warranty claims can be derived herefrom. We accept liability for the fitness of our products for particular purposes and accept such liability in writing in the individual case. In any event any justified warranty claims shall be limited to the delivery of replacement goods which are free from defect or, in the event that such subsequent improvement fails, to reimbursement of the purchase price. Any and all further claims, in particular but without limitation any liability for consequent damage, shall be excluded. Prior to use own testing must be done to prove suitability. The data are subject to change for the sake of technical progress. ® = registered trademark